Check out Eng. Head at Copley High School, Kirby Harder’s recent classroom update that details how Kirby utilizes version 2 of the “Introduction to Robotics” Curriculum for this weeks lessons on Pick-N-Place with the Dobot Magicians.
First off everyone should update the software to the newest version and get the new updated V2 Curriculum. Things are explained a lot better especially with regards to writing down what joint does what, not quite as muddy, kids always had a bit of problem with it. One thing I would like to see is the chart / controls flipped around, my students have the arms facing them and the controls are for the arms facing away. This causes a bit of confusion when working with the joints and programming the robot especially if you have never used a robot before, the controls are backwards (right is left and left is right.)
This weeks lessons on Pick-N-Place are going a bit smoother compared to the first time we went thru them. I have found that the provided curriculum V2 / lesson is good but there are parts that need reinforced before they start, it makes a world of difference. Here is what I go over.
1. Always home the robot before you start, then home the robot if you bump it or run it into anything.
2. To get exact points do the following
Use the lock button to get close
Use the controls on the computer to get the points perfect
Copy the points from manual control to your program.
Name all your Points comes in handy when using the copy and paste function.
Use the copy and Paste to quickly and accurately build a program. Often the students would use the Lock Button to create points instead of copy and paste from known coordinates.
Pause it to Grab it, Pause it to Place it.
Can Students Use DobotStudio without Admin Rights?
(Repost - please visit original post at www.chrisandjimcim.com) QUESTION: In a nutshell…we have been working on getting the software installed as a testing means and have no issues running the software in a profile that has admin rights. However, as I am sure you are...
Video Footage Winners
Congratulations to the following Winners of the video footage contest and winners of a FREE Mooz-3 3-D Printer! Marilyn Christensen of Whitesides Elementary John Petersen of Ridgeline High School Adam Truex of Doherty High School Thank you all for participating in our...
Dobot Developer Products
Introducing “Dobot Developer Products!” We are excited to announce the release of the first “Dobot Developer Products!” What is a Dobot Developer Product? A Dobot Developer Product is a Dobot Magician compatible accessory that has been created by a 3rd party...